Komponentvideo till HDMI Adapter
Component video to HDMI Adapter
VGA till HDMI konverter
VGA to HDMI converter

Komponentvideo till HDMI och VGA till HDMI konverter

Komponentvideo till HDMI och VGA till HDMI konverter

Komponentvideo (YPbPr) till HDMI adapter / konverter
Slut på lager - 2-3 dagars leveranstid.
Du får information om leveranstid i orderbekräftelsen.
Kontakta oss gärna om du vill få information i förväg.
Du kan även välja att få email så fort vi får in produkten på lager.
SKU
komponentbox4
795,00 kr
Komponentvideo till HDMI och VGA till HDMI konverter finns att köpa i steg om 1

Om produkten finns i lager skickas den senast arbetsdagen efter du beställt

Ring gärna om du har frågor om produkten
08-615 21 60

Vid köp på nätet har du 14 dagars returrätt


Komponentvideo (YPbPr) till HDMI adapter / konverter 

Component video to HDMI Converter

 

Denna adapter konverterar både komponentvideo och VGA-signaler till HDMI 1080P i 50 eller 60Hz

Perfekt för att ansluta äldre tv-spelskonsoller som XBOX, Playstation 2, Sony PSP, Nintendo WII m.fl. till en modern TV eller Projektor.

Eller tillsammans med en HDMI-switch för att hantera inkoppling av flera olika konsoller och andra enheter på enklaste sätt.

Stöd för analogt ljud till HDMI tillsammans med både VGA och Komponentvideo.

Det går att ha både VGA och Komponentvideo anslutet samtidigt, man väljer ingångskälla med en omkopplare.

VGA input har stöd för  640*480, 800*600, 1024*768, 1280*720, 1280*768, 1980*1080 i 50Hz eller 60Hz

Adaptern kan strömförsörjas med den medföljande adaptern eller via en USB-kabel. Notera att endast en av dessa skall användas, inte båda samtidigt.

 

 

  1. Instructions for XBOX360

 

  1. Insert the XBOX360 component cable into the XBOX360 A/V port (XBOX360 component cable sold separately)
  2. Insert the green output port of the component cable into the TV VIDEO port
  3. Turn on the XBOX360 console, then the colorless picture will appear on the TV
    (Go ahead to perform with XBOX360 game controller as below)
  4. Choose “system”
  5. Choose “console settings”
  6. Choose “display”
  7. Choose “HDTV Settings”
  8. Choose what you need from 480p, 720p and 1080i, and then confirm.
  9. Choose “YES, Keep these settings” and then quit
  10. Remove the XBOX360 component cable from the TV, and then connect it with Mayflash HDMI Converter
  11. Change the TV to HDMI input mode, and slide the switch on Mayflash HDMI Converter to the YpbPr side.
  12. Connect the TV and the HDMI Converter via your HDMI cable (HDMI cable sold separately)
  13. Power on the HDMI Converter. If the LED is light, the converter starts to work.
    (Note: XBOX360 supports 480p, 720p, 1080i, and 1080p)

 

 

  1. Instructions for PS3

 

  1. Insert the PS2/3 component cable into the PS3 AV MULTIOUT port (PS2/3 component cable sold separately)
  2. Insert the green output port of the component cable into the TV VIDEO port
  3. Turn on the PS3 console, then the colorless picture will appear on the TV
    (Go ahead to perform with PS3 game controller as below)
  4. Choose “Settings”
  5. Choose “Display Settings”
  6. Choose “Video Output Settings”
  7. Choose “Component/D-Terminal”
  8. Press “Change”, and then “Enter” to the next step
  9. Select all or part of 480p, 720p, 1080i & 1080p and right click the pad
  10. Pictures will appear on the TV, and then click “YES”, which should be done within 30 seconds. Otherwise Step 5,6,7, 8 and 9 have to be set again
  11. After finishing the above steps, you can follow the instructions from the TV to save the settings.
  12. Choose “Set audio output port”, then select“Scart or AV Multi”
  13. Confirm
  14. There are twice Confirming and Saving while setting PS3 console. After the setting, games can be played without restarting.
  15. Remove the PS2/3 component cable from the TV, and then connect it with Mayflash HDMI Converter
  16. Change the TV to the HDMI input mode, and slide the switch on Mayflash HDMI Converter to the YpbPr side.
  17. Connect the TV and HDMI Converter via your HDMI cable (HDMI cable sold separately)
  18. Power on the HDMI Converter. If the LED is light, the converter starts to work.

 

 

  1. Instructions for Wii

 

  1. Insert the Wii component cable into the Wii AV MULTIOUT port (Wii component cable sold separately)
  2. Insert the green output port of the component cable into the TV VIDEO port
  3. Turn on the Wii console, then the colorless picture will appear on the TV
    (Go ahead to perform with Wii game controller as below)
  4. Choose “Wii Option”
  5. Choose “Wii Settings”
  6. Choose “Screen”
  7. Choose “TV Resolution”
  8. Choose “EDTV or HDTV(480P)”
  9. Confirm
  10. Wii console will restart automatically, or you can restart it manually.
  11. Remove the Wii component cable from the TV, and then connect it with Mayflash HDMI Converter
  12. Change the TV to the HDMI input mode, and slide the switch on Mayflash HDMI Converter to the YpbPr side
  13. Connect the TV and HDMI Converter via your HDMI cable (HDMI cable sold separately)
  14. Power on the HDMI Converter. If the LED is light, the converter starts to work.

 

 

  1. Instructions for PS2

 

  1. Insert the PS2/3 component cable into the PS2 AV MULTIOUT port (PS2/3 component cable sold separately)
  2. Insert the green output port of the component cable into TV VIDEO port
  3. Turn on the PS2 console, then the colorless picture will appear on the TV.
    (Go ahead to perform with PS2 game controller as below)
  4. Choose "system configuration"
  5. Choose "component Video out"
  6. Choose "YCb/Pb Cr/Pr"
  7. Confirm and Quit
  8. Remove the PS2/3 component cable from the TV, and then connect it with Mayflash HDMI Converter
  9. Change the TV to the HDMI input mode, and slide the switch on Mayflash HDMI Converter to the YpbPr side.
  10. Connect the TV and HDMI Converter via your HDMI cable (HDMI cable sold separately)
  11. Power on the HDMI Converter. If the LED is light, the converter starts to work.
    (Note: Your TV must support 480i because PS2 console can only output 480i picture.)

 

 

  1. Instructions for XBOX

 

  1. Insert the XBOX component cable into the XBOX Audio Video input/output port (XBOX component cable sold separately)
  2. Insert the green output port of the component cable into TV VIDEO port
  3. Turn on the XBOX console, then the colorless picture will appear on the TV
    (Go ahead to perform with XBOX game controller as below)
  4. Choose “SETTINGS”
  5. Choose “Video”
  6. Choose what you need from 480p, 720p and 1080i
  7. Press “YES” and then quit
  8. Remove the XBOX component cable from the TV, and then connect it with Mayflash HDMI Converter
  9. Change the TV to the HDMI input mode, and slide the switch on Mayflash HDMI Converter to the YpbPr side.
  10. Connect the TV and HDMI Converter via your HDMI cable (HDMI cable sold separately)
  11. Power on the HDMI Converter. If the LED is light, the converter starts to work.
    (Note: XBOX console supports 480p, 720p and 1080i)

 

 

Mer information:
Begagnad Nej
Utgått ur sortimentet Nej
Skriv din egen recension
Tack för att du vill skriva en recension av denna produkt. Du måste vara registrerad och inloggad för att göra detta. Vänligen Logga in eller registrera ett konto
Vi hittade andra produkter som du kanske gillar!