Xecuter JR Programmer v2 (liten bild)

Xecuter JR Programmer v2

Xecuter JR Programmer v2

Cheap NAND JTag SPI reader / programs.
Out of Stock - We can not accept orders at this time.

Products in stock will be shipped out the same day or the day after you order.

Please give us a call if you have any questions
+46 8 615 21 60

You may return regretted purchases within 14 days of receiving the package.

With this product you can read / write from / to your NAND over SPI and Program Xillinx Coolrunner circuits over USB!

Complete with a CoolRunner JTAG cable that you can easily connect with the chip and reprogram the circuit with no soldering (works together with the latest J-runner, it must be at least build 268) Also comes with NAND Installation cables which are also compatible with NAND-X QSB Board. If you do not use the QSB board you can simply cut off the connections and just solder the cables directly.

JR Programs can be upgraded using Xecuter x360 USB Pro's update program, the LEDs on the chip indicate that it has power and if it is actively working on something.


Fast NAND Programming
Fast XILINX CoolRunner JTAG programming
Compatible with both Phat and Mucus
LEDs indicating power / activity
New version of JR Programs with Full POST monitoring and support for CR3Pro Rater
The programmer is also said to be 2-3 minutes faster with reading and programming than his predecessor. however, NAND-X is the fastest on the market.

The information below we couldn't quite translate yet.
A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read / write NAND over SPI, CoolRunners program or any Xilinx based RGHdevice over USB and also able to program onboard sounds using the TXSONUS 360!

Complete with a CR JTAG cable so you simply plug in an application without anysoldering using the latest J-Runner App (needs at least Build283). Also comes with NAND installation wires that have the connector status compatible with the NAND-X QSB boards. If you do not use the QSBs you can simply cut off the connectors and do a normal wires onlyinstall.

The JR Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LEDs indicate Powerand BootLoader mode.

RED LED: Bootloader Mode (Switch to the left)
GREEN LED: JR Programmer Mode (Switch to the right)
RED LED FLASHING: R / W Activity & POST Activity (Switch to theright)

  • Fast NAND Programming
  • Fast XILINX CR JTAG Programming
  • Compatible with all CoolRunners inc new CR3 Pro
  • Supports Full Post Monitoring
  • Compatible with both Phat and Slim
  • Onboard LEDs indicate Power & Data
  • Easy Install System
  • Compatible with All NAND-X QSBs
  • Includes Cable For QSB V3 Kit or Wires Install (QSBV3Kits Sold Separately)
  • Includes Cable For Xilinx CRJTAG
  • Includes Cable for Xecuter Sonus 360 (Sonus 360 QSBSold Separately
  • Trinity Kit or Corona Kit)
  • Includes KIOSK option for Remote On
  • Built-in Programs For Future Firmware Upgrades
  • Designed for the latest J-Runner App (Build 283+)
  • Rock Solid Design Tested by the J-Runner Team
  • Supports New QSB V3 Kits (Solder Separately)
  • Supports Sonus 360 Programming
  • Affordable We Provide You With More For Less!
  • High Quality & Trusted TX Design

    Included in teh kit:
  • JR Programs
  • NAND Cable Set (Can fit to optional QSB or cut use aswires installed)
  • CoolRunner JTAG Cable Set
More Information
Begagnad No
Denna produkt har utgått ur sortimentet No
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account