Xecuter Connectivity Kit 3 PROBE 2 (liten bild)

Xecuter Connectivity Kit 3 PROBE 2

Xecuter Connectivity Kit 3 PROBE 2

Tillbehör till Xecuter Connectivity Kit V3 för lättare urläsning av lite-on firmware!
Finns på lager
SKU
360ck3probe2
399,00 kr
Xecuter Connectivity Kit 3 PROBE 2 finns att köpa i steg om 1

Om produkten finns i lager skickas den senast arbetsdagen efter du beställt

Ring gärna om du har frågor om produkten
08-615 21 60

Vid köp på nätet har du 14 dagars returrätt


Probe för urläsning av liteon dvd-nyckeln utan att behöva löda!
Används tillsammans med Xecuter Connectivity kit V3
No Solder Liteon Solution. Use for dumping the 74850 key and enabling full firmware access of the new 83850V2 and 93450 drives.
 
After the amazing success of our LT Switch solution, we are pleased to launch the latest addition to the CK3 family of products ? the FIRST complete NO SOLDER solution for the newer Liteon DVD drives ? the CK3 Probe v2.
 
This is targeted to installers who require a multi-use no solder solution to the new Liteon drives ? or to the users who simply do not have the skills to solder our cheaper LT switch alternative.
 
You will still need to do the cuts ? but we are providing a specially commissioned conductive glue kit so you can easily repair the traces with no soldering (the glue is usually very expensive). There is enough glue to do about 10 DVD units.
 
Still retaining the original CK3 Probe function of dumping the 74850 key, but now also enabling full firmware access of the new 83850V2 and 93450 drives ? you can easily switch between PROBE and LT Switch Modes ? A complete all-in-one solderless solution !
 
? Liteon 74850 ? No Cuts Required ? No Rebuild PCB Required. Switch to original CK3 Probe Function for DVD Key Extraction
? Liteon 83850V2 ? 3 Small Trace Cuts (Same as LT Switch) ? No Rebuild PCB Required. Special Conductive Glue supplied with kit to easily repair the cuts (Enough for at least 10 DVD Drives) ? No Soldering !
? Liteon 93450 ? 3 Small Trace Cuts (Same as LT Switch) ? No Rebuild PCB Required. Special Conductive Glue supplied with kit to easily repair the cuts (Enough for at least 10 DVD Drives) ? No Soldering !
Installers can use this again and again and again and again ? No rebuild boards ? no soldering ? NO PROBLEM !
The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LED?s and an extra protection circuit against accidental shortages on the DVD PCB.
 
 
 
i paketet ingår: Xecuter probe+ kabel för att ansluta probe med Xecuters CKV3 
OBS FUNGERAR BARA MED Xecuters Connectivity kit V3 PRO!
Mer information:
Begagnad Nej
Utgått ur sortimentet Nej
Skriv din egen recension
Tack för att du vill skriva en recension av denna produkt. Du måste vara registrerad och inloggad för att göra detta. Vänligen Logga in eller registrera ett konto